|
Spring Lock |
| |
|
Spring-Lock manual quick hitches
are a reliable and
easy option for mini, midi and backhoe excavators |
| |
| |
|
Standard features include:
-
Lower
main frame constructed from Hardox 400™
for strength and durability.
-
Uses standard buckets fitted with
dummy pins, requires no costly alterations to existing buckets.
-
Easy to fit, no pipe work or fittings
just pins on and is ready to use immediately.
-
Bucket is locked on by a strong
spring, and is released by opening the rear hook using the bar
supplied.
-
Manual safety pin (which cannot be
totally removed) for complete safety.
|
|
 |
 |
 |
 |
|
Options:
-
Tested lifting eye (c/w certificate).
-
Spring adjusting bolt to tighten or
loosen the tension of the spring.
-
Mix and match i.e. fit JCB 3CX
buckets to Hitachi EX60 machine.
|
|
Multi-Lock |
| |
|
Multi-Lock hydraulic quick hitches are built to a
high specification
to give a long service life and reliability |
| |
| |
Standard features include:
- Lower main frame constructed from Hardox 400™
for strength and durability.
- Supplied complete with full
fitting kit including high pressure hoses, solenoid, valve switch,
fittings and instructions
- Check valves in both ram and
solenoid valve, in case of hydraulic failure.
- High grade steel safety pin with
3 position fitting for complete security.
- Lifting eye tested to half
machine weight (minimum) c/w certificate.
- Allows variable centre pick-up
e.g. Cat 320, Hitachi EX200/215, Komatsu PC210, JCB JS200/220 etc
can be used with the same hitch.
- Manufactured to fit YOUR
attachments NOT someone else's (ie dipper width is correct
for your machine)
|
|
 |
|
|
|
Full fitting service available. |
| |
|
Wedge |
| |
|
Wedge type manual quick hitches are built to a high
specification
to give a long service life and reliability |
|
 |
 |
 |
| |
|
Standard features
include:
-
Lower main frame constructed from Hardox 400™
for strength and durability.
-
High grade steel safety pin with
3 position fitting for complete security.
-
Lifting eye tested to half
machine weight (minimum) c/w certificate.
-
Allows up to 10mm adjustment each way
of manufacturers pin centres
|
|
 |
 |
 |
| |
|
Available for 10 to 75 ton
excavators |
| |